SABIC® LLDPE 0132HS00 is a hexene-1 copolymer medium density grade, which combines excellent extrusion performance, mechanical properties, ESCR and low migration values.

Application.

SABIC® LLDPE 0132HS00 is especially developed for the application in high demanding extrusions segments like e.g. sheet and more specific geo-membranes.

Properties.

Tensile test is determined on compression moulded specimen (1.6 mm thick) at 200 mm/min. NCTL conditions: 5 MPa, 60 °C and 2 % surfactant. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 118N is a butene linear low density polyethylene resin designed for general purpose applications. Films produced from this resin are tough with excellent puncture resistance, high tensile strength and good hottack properties.

Application

Typical applications for SABIC® LLDPE 118N are shipping sacks, ice bags, frozen food bags, liners, carrier bags, garbage bags, agriculture films, lamination and coextruded films, shrink film (for blending with LDPE), industrial consumer packaging and high clarity film if blended with (10-20%) LDPE.

Film properties

Film of 50 μm and BUR=2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2,7 mm. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 118NE is a butene linear low density polyethylene resin designed for general purpose applications. Films produced from this resin are tough with excellent puncture resistance, high tensile strength, good hottack properties and low gel levels. SABIC® LLDPE 118NE is TNPP free.

Application

Typical applications for SABIC® LLDPE 118NE are shipping sacks, ice bags, frozen food bags, liners, carrier bags, garbage bags, agriculture films, lamination and coextruded films, shrink film (for blending with LDPE), industrial consumer packaging and high clarity film if blended with (10-20%) LDPE.

Film properties

Film of 50 μm and BUR=2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2,7 mm. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications.

SABIC® LLDPE 118NJ is a butene linear low density polyethylene resin designed for general purpose applications. Films produced from this resin are tough with excellent puncture resistance, high tensile strength and good hottack properties. SABIC® LLDPE 118NJ is TN-PP free.

Application

Typical applications for SABIC® LLDPE 118NJ are shipping sacks, ice bags, frozen food bags, liners, carrier bags, garbage bags, agriculture films, lamination and coextruded films, shrink film (for blending with LDPE), industrial consumer packaging and high clarity film if blended with (10-20%) LDPE.

Film properties

Film of 50 μm and BUR=2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2,7 mm. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 118W is a butene linear low density polyethylene resin for general purpose applications. Films produced from this resin are tough with excellent puncture resistance, high tensile strength and good hottack properties. The resin contains anti block and slip erucamide.

Application

Typical applications for SABIC® LLDPE 118W are shipping sacks, ice bags, frozen food bags, liners, carrier bags, garbage bags, agriculture films, lamination and coextruded films, shrink film (for blending with LDPE), industrial consumer packaging and high clarity film if blended with (10-20%) LDPE.

Film properties

Film of 50 μm and BUR=2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2,7 mm. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 118WE is a butene-linear low density polyethylene resin for general purpose applications. Films produced from this resin are tough with excellent puncture resistance, high tensile strength, good hottack properties and low gel levels. The resin contains anti block and slip erucamide. SABIC® LLDPE 118WE is TNPP free.

Application

Typical applications for SABIC® LLDPE 118WE are shipping sacks, ice bags, frozen food bags, liners, carrier bags, garbage bags, agriculture films, lamination and coextruded films, shrink film (for blending with LDPE), industrial consumer packaging and high clarity film if blended with (10-20%) LDPE.

Film properties

Film of 50 μm and BUR=2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2,7 mm. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications.

SABIC® LLDPE 118WJ is a butene linear low density polyethylene resin for general purpose applications. Films produced from this resin are tough with excellent puncture resistance, high tensile strength and good hottack properties. The resin contains anti block and slip erucamide. SABIC® LLDPE 118WJ is TN-PP free.

Application

Typical applications for SABIC® LLDPE 118WJ are shipping sacks, ice bags, frozen food bags, liners, carrier bags, garbage bags, agriculture films, lamination and coextruded films, shrink film (for blending with LDPE), industrial consumer packaging and high clarity film if blended with (10-20%) LDPE.

Film properties

Film of 50 μm and BUR=2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2,7 mm. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 218B is a butene linear low density polyethylene resin designed for easy processing and specially formulated for optimum thermal stability at high temperatures used in cast film extrusion. Cast films produced from SABIC® LLDPE 218B exhibit excellent optical properties, improved toughness, puncture resistance and tear strength.

Application

SABIC® LLDPE 218B resin is recommended for hand and pallet stretch wrap.

Film properties

Properties are determined on 20 μm cast stretch film produced on a 2 m commercial cast stretch line: melt temperature 270 °C, chill roll temperature 20 °C and line speed of 450 m/min.

Processing conditions

SABIC® LLPDE 218B is extrudable with conventional cast film extrusion equipment. Minor machine modifications may be required for optimum use. Cast film melt temperatures 250 - 300 °C. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications.

SABIC® LLDPE 318B is a butene linear low density polyethylene resin designed for easy processing and specially formulated for optimum thermal stability at high temperatures used in cast film extrusion. Cast film produced from SABIC® LLDPE 318B exhibit excellent optical properties, puncture resistance and tear strength.

Application

SABIC® LLDPE 318B resin is recommended for hand and pallet stretch wrap.

Film properties

Properties are determined on 20 μm cast stretch film produced on a 2 m commercial cast stretch line: melt temperature 270 °C, chill roll temperature 20 °C and line speed of 450 m/min.

Processing conditions

SABIC® LLPDE 318B is extrudable with conventional cast film extrusion equipment. Minor machine modifications may be required for optimum use. Cast film melt temperatures 250 - 300 °C. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 318BE is a butene linear low density polyethylene resin designed for easy processing and specially formulated for optimum thermal stability at high temperatures used in cast film extrusion. Cast film produced from SABIC® LLDPE 318BE exhibit excellent optical properties, puncture resistance and tear strength. The suffix E denotes European origin.

Application

SABIC® LLDPE 318BE resin is recommended for hand and pallet stretch wrap.

Film properties

Properties are determined on 20 μm cast stretch film produced on a 2 m commercial cast stretch line: melt temperature 270 °C, chill roll temperature 20 °C and line speed of 450 m/min.

Processing conditions

SABIC® LLPDE 318BE is extrudable with conventional cast film extrusion equipment. Minor machine modifications may be required for optimum use. Cast film melt temperatures 250 - 300 °C. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 318CN is a Linear Low Density Polyethylene natural resin designed for wire and cable applications. SABIC® LLDPE 318CN contains a low level of antioxidants and does not contain any antiblock and/or slip agents. It also exhibits excellent Environmental Stress Crack Resistance (ESCR). Sufficient Cu-inhibitor should be added to meet specific ageing requirements. For jacketing applications, addition of Carbon Black or UV stabilizer is required.

Applications

- Telecommunication and Power cable (LV, MV, HV) jacketing.

- Halogen-free flame retardant (HFFR) compounds.

- One-step or two-steps silane crosslinkable for cable insulation.

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 324CN is a Linear Low Density Polyethylene natural resin designed for wire and cable applications. SABIC® LLDPE 324CN contains a low level of antioxidants and does not contain any antiblock and/or slip agents. It also exhibits excellent Environmental Stress Crack Resistance (ESCR). Sufficient Cu-inhibitor should be added to meet specific ageing requirements. For jacketing applications, addition of Carbon Black or UV stabilizer is required.

Applications

- Telecommunication and Power cable (LV, MV, HV) jacketing.

- Halogen-free flame retardant (HFFR) compounds.

- One-step or two-steps silane crosslinkable for cable insulation.

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 430BE is a butene linear low density polyethylene resin. The material, natural resin, is designed for cast film applications, offering good mechanically properties, stiffness enhancement and furthermore enables to gain high line speeds. SABIC® LLDPE 430BE is provided with a dedicated anti oxidant package suitable for cast film extrusion with low gel levels.

Applications

Skin layers for non-cling stretch cast film, Cast film side encapsulation, Mid layer Hygienic cast film and Product to realize downgauging by stiffness enhancement.

Film properties

Properties are determined on 20 μm cast stretch film produced on a 2 m commercial cast stretch line: melt temperature 270 °C, chill roll temperature 20 °C and line speed of 450 m/min.

Processing conditions

SABIC® LLDPE 430BE is extrudable with conventional cast film extrusion equipment. Minor machine modifications may be required for optimum use. Cast film melt temperatures 250 - 300 °C. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 518N is a butene linear low density polyethylene resin. Films produced from this resin have outstanding toughness, excellent puncture resistance, good heat sealing behaviour and excellent machinability on conversion lines.

Application

Typical applications for SABIC® LLDPE 518N are heavy duty shipping sacks, ice bags, frozen food bags, potato bags and agriculture films.

Film properties

Film of 50 μm and BUR=2 has been produced on Kiefel IBC with 130 kg/h. Die size 200 mm, die gap 2,7 mm.

SABIC® LLDPE 6118LE is a hexene linear low density polyethylene resin. Films made from this resin exhibit excellent tensile strength, stiffness, dart drop, impact strength, tear strength and hottack properties. This resin contains anti block and slip Erucamide. The suffix E denotes European origin.

Application

Typical application for SABIC® LLDPE 6118LE are heavy duty bags, lamination films, agriculture films, stretch wrap films, frozen food packaging and other applications requiring high impact strength, high tear resistance and improved sealing properties.

Film properties

Film of 50 μm and BUR = 2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2.7 mm. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 6118NE is a hexene linear low density polyethylene resin. Films made from this resin exhibit an excellent tensile strength, stiffness, dart drop, impact strength, tear strength and seal/hottack properties. The suffix E denotes European origin.

Application

Typical application for SABIC® LLDPE 6118NE are heavy duty bags, lamination films, agriculture films, stretch wrap films, frozen food packaging and other applications requiring higher impact strength, higher tear resistance and improved sealing properties.

Film properties

Film of 50 μm and BUR = 2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2.7 mm. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 6135NE is a hexene linear low density polyethylene resin. Films made from this resin exhibit an outstanding balance between mechanical properties (like impact strength, tear strength and hottack) and optical properties on the one hand and stiffness on the other hand.

Application

Typical applications for SABIC® LLDPE 6135NE are heavy duty bags, lamination films, agriculture films, frozen food packaging and other applications requiring a balance between high impact strength, tear resistance and stiffness. The grade is especially suited for multi layer recipes.

Film properties

Film of 50 μm and BUR = 2 has been produced on Kuhne BF line with an output of 35 kg/h. Die size 120 mm, die gap 2.7 mm. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 6218BE is a hexene linear low density polyethylene resin for cast film applications. The product has been specially formulated for optimum thermal stability at high temperatures used in cast film extrusion. Cast films produced from SABIC® LLDPE 6218BE exhibit excellent optical properties, improved toughness, puncture resistance and tear strength. The suffix E denotes European origin.

Application

SABIC® LLDPE 6218BE resin is recommended for pallet stretch wrap (pre-stretch), high performance draw down films and other mono layer and coextruded film applications where high strength is required. The grade is also suggested for blending with ethylene/butene copolymer LLDPE and LDPE for improving strength.

Film properties

Properties are determined on 20 μm cast stretch film produced on a 2 m commercial cast stretch film line: melt temperature 270 °C, chill roll temperature 20 °C and a line speed of 450 m/min.

Processing conditions

SABIC® LLDPE 6218BE is extrudable with conventional cast film extrusion equipment. Temperatures 250-300 °C. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 6318BE is a hexene linear low density polyethylene resin for cast film applications. The product has been specially formulated for optimum thermal stability at high temperatures used in cast film extrusion. Films produced from this grade exhibit excellent optical properties, toughness, puncture resistance and tear strength. The suffix E denotes European origin.

Application

SABIC® LLDPE 6318BE resin is recommended for pallet stretch wrap (pre-stretch), high performance draw down films and other mono layer and coextruded film applications where high strength is required. The grade is also suggested for blending with ethylene/butene copolymer LLDPE and LDPE for improving strength.

Film properties

Properties are determined on 20 μm cast stretch film produced on a 2 m commercial cast stretch line: melt temperature 270 °C, chill roll temperature 20 °C and line speed 450 m/min.

Processing conditions

SABIC® LLDPE 6318BE is extrudable with conventional cast film extrusion equipment. Temperatures 250-300°C.

SABIC® LLDPE 6335BE is a hexene linear low density polyethylene resin for cast film applications. The product has been specially formulated for optimum thermal stability at high temperatures used in cast film extrusion. Cast films produced from SABIC® LLDPE 6335BE exhibit excellent optical properties, toughness, puncture resistance, tear strength and stiffness. The suffix E denotes European origin.

Application

SABIC® LLDPE 6335BE resin is recommended for use in non cling layers in pallet stretch wrap (pre-stretch), high performance draw down films and other mono layer and coextruded film applications where high strength is required.

Film properties

Properties are determined on 20 μm cast stretch film produced on a 2 m commercial cast stretch film line: melt temperature 270 °C, chill roll temperature 20 °C and line speed 450 m/min.

Processing conditions

SABIC® LLDPE 6335BE is extrudable with conventional cast film extrusion equipment. Minor machine modification may be required for optimum use. Cast film melt temperatures 250 - 300 °C. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 6821NE is a hexene linear low density polyethylene. Films made from this resin exhibit outstanding tensile strength, stiffness, dart drop, impact strength, tear strength and hottack properties. The suffix E denotes European origin.

Application

Typical application for SABIC® LLDPE 6821NE are heavy duty bags, lamination films, agriculture films, stretch wrap films, frozen food packaging and other applications requiring high impact strength and tear resistance.

Film properties

Film of 50 μm and BUR = 2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2.7 mm. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 726N is a butene linear low density polyethylene resin. This grade is designed to give blown films a relatively high stiffness for good machinability and a good overall balance of other performance properties, such as puncture resistance, impact strength and heat sealability.

Application

Typical applications for SABIC® LLDPE 726N are shipping sacks, produce bags, can liners and carrier bags. SABIC® LLDPE 726N has very good optical properties when blended with a LDPE (15-85%).

Film properties

Film of 50 μm and BUR=2 has been produced on Kiefel IBC with 130 kg/h. Die size 200 mm, die gap 2,7 mm. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 726NE is a butene linear low density polyethylene resin. This grade is designed to give blown films a relatively high stiffness for good machinability and a good overall balance of other performance properties, such as puncture resistance, impact strength and heat sealability.

Application

Typical applications for SABIC® LLDPE 726NE are shipping sacks, produce bags, can liners and carrier bags. SABIC® LLDPE 726NE has very good optical properties when blended with a LDPE (15-85%).

Film properties

Film of 50 μm and BUR=2 has been produced on Kiefel IBC with 130 kg/h. Die size 200 mm, die gap 2,7 mm. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 726Q is a butene linear low density polyethylene resin. This grade is designed to give blown films a relatively high stiffness and a good overall balance of other performance properties. This material contains anti block, slip erucamide and processing aid.

Application

Typical applications for SABIC® LLDPE 726Q are shipping sacks, produce bags, can liners and carrier bags. SABIC® LLDPE 726N has very good optical properties when blended with a LDPE (15-85%).

Film properties

Film of 50 μm and BUR=2 has been produced on Kiefel IBC with 130 kg/h. Die size 200 mm, die gap 0.8 mm. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE 726QE is a butene linear low density polyethylene resin. This grade is designed to give blown films a relatively high stiffness and a good overall balance of other performance properties. This material contains anti block, slip erucamide and processing aid.

Application

Typical applications for SABIC® LLDPE 726QE are shipping sacks, produce bags, can liners and carrier bags. SABIC® LLDPE 726QE has very good optical properties when blended with a LDPE (15-85%).

Film properties

Film of 50 μm and BUR=2 has been produced on Kiefel IBC with 130 kg/h. Die size 200 mm, die gap 0.8 mm. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE M200024 is a linear low density polyethylene copolymer injection moulding grade with a narrow molecular weight distribution. It has been designed to have excellent low temperature toughness, stress crack resistance (ESCR) and gloss.

Typical applications.

SABIC® LLDPE M200024 is well suited for injection moulding of large items where high flow and fast cycles are required. It is recommended for housewares, trash cans, automotive parts, lids and large industrial containers.

Processing conditions.

Typical moulding conditions for SABIC® LLDPE M200024 are:

Material temperature: 193 - 232 °C (380 - 450 °F)

Mould temperature: 5 - 30 °C (40 - 85 °F)

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE M500026 is a high flow, linear low density polyethylene copolymer injection moulding grade with a narrow molecular weight distribution. It has been designed to have excellent low temperature toughness, stress crack resistance (ESCR), mouldability and gloss.

Typical applications.

SABIC® LLDPE M500026 is recommended for injection moulding of containers and reclosure lids. It is well suited for fast cycle, deep draw injection moulding applications, which takes advantage of its high flow properties. Also, the higher melting point of the material allows for high end-use temperature when compared with conventional polyehtylenes of equal density.

Processing conditions.

Typical moulding conditions for SABIC® LLDPE M500026 are:

Material temperature: 180 - 230 °C (355 - 446 °F)

Mould temperature: 5 - 30 °C (40 - 85 °F)

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE PCG6118NE is a hexene-linear low density polyethylene for healthcare applications. Films made from this resin exhibit excellent mechanical, optical and hottack properties.

Application

Typical application for SABIC® LLDPE PCG6118NE are pharmaceutical films, bags and pouches requiring higher impact strength, tear resistance, better optical performance and improved hottack properties.

Film properties

Film of 50 μm and BUR = 2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2.7 mm.

Compliance to Regulations

SABIC® LLDPE PCG6118NE complies with the relevant monographs of the European Pharmacopoeia. The product mentioned herein may not be used for medical healthcare devices or materials intended for temporary or permanent implementation in the human body.

SABIC® LLDPE R50035E is a LLDPE copolymer that is designed to provide excellent stress crack resistance, excellent mechanical properties with high rigidity, toughness, gloss and very low warpage. The resin contains UV stabilizer. It is recommended that SABIC® LLDPE R50035E is grinded before use in rotational moulding applications.

Typical Applications.

SABIC® LLDPE R50035E is desinged for rotational moulding of large industrial and agricultural tanks, trash containers and chemical shipping drums. Its excellent mechanical properties and low warpage makes it suitable for injection moulding applications such as screw closures, caps and housewares. SABIC® LLDPE R50035E is UV stabilised; that provides excellent protection for the final product.

Processing conditions.

Oven temperature °C (°F) = 315 (600)

Typical processing temperature for injection moulding machines: 210 - 240 °C.

Mechanical properties.

Test specimens are prepared from compression moulded sheet made according to ASTM D-1928, procedure C. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE R50035EE is a LLDPE copolymer that is designed to provide excellent stress crack resistance, excellent mechanical properties with high rigidity, toughness, gloss and very low warpage. The resin contains UV stabilizer. It is recommended that SABIC® LLDPE R50035EE is grinded before use in rotational moulding applications.

Typical Applications.

SABIC® LLDPE R50035EE is desinged for rotational moulding of large industrial and agricultural tanks, trash containers and chemical shipping drums. Its excellent mechanical properties and low warpage makes it suitable for injection moulding applications such as screw closures, caps and housewares. SABIC® LLDPE R50035EE is UV stabilised; that provides excellent protection for the final product.

Processing conditions.

Oven temperature °C (°F) = 315 (600)

Typical processing temperature for injection moulding machines: 210 - 240 °C.

Mechanical properties.

Test specimens are prepared from compression moulded sheet made according to ASTM D-1928, procedure C. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE R40039E is a medium density polyethylene (MDPE) copolymer. It is designed to provide excellent stress crack resistance, excellent mechanical properties with high rigidity, toughness, gloss and very low warpage. It is recommended that SABIC® LLDPE R40039E is grinded before use in rotational moulding applications.

Typical applications.

SABIC® LLDPE R40039E is a grade whose good processing performance and physical properties make it suitable for the rotational moulding of large industrial and agricultural tanks, trash containers and chemical shipping drums. Its excellent mechanical properties and low warpage makes it suitable for injection moulding applications such as screw closures, caps and housewares.

Processing conditions.

Moulding cycles vary with mould composition and mould wall thickness, oven temperature and wall thickness of the part being produced. Venting of the mould is recommended. Normal cooling is satisfactory for SABIC® LLDPE R40039E.

Oven temperature °F (°C) = 600 (315)

Typical processing temperature for injection moulding machines: 210 - 240 °C.

Mechanical properties.

Test specimens are prepared from compression moulded sheet made according to ASTM D-1928, procedure C. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

SABIC® LLDPE RG50035 is a Linear Low Density Polyethylene reactor powder grade designed for various compounding applications, including Wire & Cable extrusion. SABIC® LLDPE RG50035 contains a low level of antioxidants and does not contain any antiblock and/or slip agents.

Application

- Base resin for Cable compounds and masterbatches.

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.